Luminous Landscape Forum
Raw & Post Processing, Printing => Printing: Printers, Papers and Inks => Topic started by: David Eckels on September 04, 2017, 03:16:25 pm
-
I have been trying to print a landscape on my ipf8400. As can be seen below, a test print (Job 3) does fine. Job 2 does not. Other than the size of the prints, all other printer settings are identical, yet Job 2 just hangs. No error messages, nothing. Even if I wait it out by taking a nap ;) nada. Any advice?
From the status log:
Job 2
User Name: David Document Name: Lightroom (Matanuska Glacier River Valley copy.tif)
Page Count: 0 Job Status: Comp
Print Start Time: 2017/09/04 12:16 Print End Time: 2017/09/04 12:16 Print Time: 0sec.
Output Image Size: 1117.6 x 327.5 mm Media Type: ArtSatin Canvas I/F: Network
Paper Area Consumed: 0.0000 m2 Paper Width: 0.0 mm Paper Length: 0.0 mm
Ink Consumed:PC: 0.000ml C: 0.000ml MBK: 0.000ml Y: 0.000ml M: 0.000ml PM: 0.000ml
R: 0.000ml G: 0.000ml B: 0.000ml PGY: 0.000ml GY: 0.000ml BK: 0.000ml
Job 3
User Name: David Document Name: Lightroom (Gamut_Test_File_Flat ProPhoto.tif)
Page Count: 1 Job Status: Comp
Print Start Time: 2017/09/04 12:08 Print End Time: 2017/09/04 12:12 Print Time: 256sec.
Output Image Size: 1117.6 x 279.4 mm Media Type: ArtSatin Canvas I/F: Network
Paper Area Consumed: 0.3289 m2 Paper Width: 1117.6 mm Paper Length: 294.3 mm
Ink Consumed:PC: 0.047ml C: 0.121ml MBK: 0.035ml Y: 0.152ml M: 0.061ml PM: 0.050ml
R: 0.056ml G: 0.063ml B: 0.061ml PGY: 0.090ml GY: 0.080ml BK: 0.031ml
-
The original PSD from which I prepared the gallery wrapped form is printing fine. I can only say that during the gallery wrapping process, the image was over 1.5 GB and PS wanted to save it as a 16 bit a PSB. LR won't read PSB files, so I converted it to an 8 bit tiff (for some reason PS want to save it as a PSB even though the 8 bit mode reduced the file size to 750 MB. Help!